The secret life of your garage

By Larry Erickson

Garages often harbor a not-so-secret second life: heroic home workshop. They’re well-suited to the task, with a tolerance for the noise and dust of do-it-yourself projects.

But if a garage workshop isn’t comfortable and convenient to use, you’ll avoid projects rather than enjoy them. Here are the essentials:

Adequate work space. Ideally, you’ll need room to work even when your cars are parked inside. Figure a minimum area of 10 ft. long and 6 ft. deep.

Appropriate storage. Places for tools and supplies are mandatory — the top of your work surface doesn’t count!

Excellent lighting. Both task and ambient lighting help keep you safe and projects mistake-free.

Durable surfaces. Pound away on your work

surface — it can take it.

Easy-to-clean environment.

You can assemble a basic workbench, cabinets, shelving, and add simple overhead lighting for less than $500. At the other end of the spectrum, there’s no end; you can spend tens of thousands of dollars creating an ultimate garage shop showplace.

Your Workbench — Heart and Soul of DIY

Your primary work surface should be a rock-solid bench with a hard and heavy top. Buy or build the best you can manage. (Then vow to keep the top clear — tools and materials have a way of eating up workbench space).

Premade workbenches run $100 to $500 and come in many lengths; they’re usually 24 inches deep. A

38-inch height is typical, but you might be more comfortable with a work surface as low as 36 or as high as 42 inches. Some benches include vises, drawers, and shelves.

Build one yourself using readily available plans.

A simple, sturdy workbench takes less than a day to build and materials cost less than $100. A more complex bench with a miter saw stand and drawers costs $300-$500 to build and takes a weekend.

The Right Bright Light

Garage work surfaces need bright ambient light and strong task lighting.

High-intensity lights (halogen, LEDs, and others) are great for over-bench task lighting. An LED task light with a flexible goose-neck puts light where you need it.

If your garage has a finished ceiling, recessed fixtures (can lights) are inexpensive ($10-$20) and are good for task and ambient lighting.

Ceiling-mounted fluorescent light fixtures are the classic, low-cost solution for workshop lighting. A two- or four-bulb, 48-inch fluorescent fixture costs less than $50.

When shopping for workshop lighting, think lumens rather than watts. A lumen is a measure of lighting brightness, and is a handy way to compare today’s new energy-efficient light bulbs. Lighting fixtures and bulbs have labels that indicate lumens per device. A general rule of thumb is to use 130 to 150 lumens per square foot of work space.

For example, a 40-watt fluorescent bulb puts out about 2,200 lumens. A 60-watt incandescent bulb puts out about 800 lumens.

Adding Adequate Electrical Power

Along with your new lights, be sure your garage workshop has adequate electrical service — outlets and capacity — to accommodate your arsenal of power tools. Place outlets nearby; don’t depend on extension cords stretched across your garage — they can be a tripping hazard. If you don’t have 30-amp circuits on your garage service, talk with an electrical contractor about making this simple upgrade.

Good electricians work quickly, so installing shop lights might take only an hour or two if access to electrical service is readily available. Increasing circuit capacity generally requires running new, heavier-gauge wire from your circuit-breaker box to the shop site.

Storage: Everything in Its Place

Don’t make yourself rummage through old coffee cans full of rattling bolts and bits: Visit home improvement centers for garage storage ideas and products.

Modular, wall-mounted garage storage systems let you configure shelves, bins, and hooks the way you need. Cost is about $10 per sq. ft. of wall space.

Plastic bins and hefty tubs protect tools, sandpaper, and tool manuals from insects, rodents, and dust. A 10-gallon plastic tub with lid is $5-$8.

Old kitchen cabinets, available where salvaged building materials are sold, are a great way to add storage — and a homemade workbench. Salvaged cabinets are about 50-75% cheaper than new. Top a run of cabinets with ¾-inch plywood for a durable work surface.

— houselogic.com